Suitable Substrates
- Ensure 24 hours time interval for grouting after tile fixing.
- The joints must be dry, clean, free of dust & adhesive.
- Emptied at least 2/3 of the tile thickness depth.
- Before grouting, make sure that the installation adhesive has set and released most of its moisture. The joints should not be wet during work.
- Put masking tape by side of grouting space or sealer if necessary.
Grout Hardener
Packing :
100 ml, 250 ml, 500 ml & 1 Ltr.
Features / Benefits :
- Easy to use & clean — just mix with Polymix grout on site, ready to use.
- Polymer emulsion — impart flexibility, water & stain resistant, abrasion resistant.
- Suitable for varied tile and stones — ceramic, vitrified, marbles, granites etc.
- Crack free and less of shrinkage reduces the chances of water seepage.
- Durable — enhances compressive & flexural strength and shock resistance.
Application:
- Using a hard rubber squeegee / grout floater, press the grout firmly into joints.
- Hold the float at a 90° angle and pull it at a 45° angle diagonally across the joints and tile to avoid pulling out the material.
- Work in small areas to have better control on removing the excess grout from joints and surface by moving the squeegee diagonally to the grout lines.
- Ensure that joint is filled completely, and grout is not just sitting on top.
